The revolutionary U-SAFE feature of the MOTION Infinity headsets uses an advanced acceleration sensor to detect and measure hard impacts and unusual acceleration patterns on the helmet, similar to those that can occur in an accident. If the U-SAFE function is activated via the app and the alarm was triggered, for example, by a hard blow to the helmet, you have 30 seconds to cancel the alarm. If no reaction occurs or is no longer possible, U-SAFE sends an SMS / email via the connected smartphone to up to three previously stored contacts, to inform them of the possible accident. The message also shows the location with GPS details on a map, as well as the nearby hospitals with contact details. Especially when driving alone or on roads with little traffic or off-road U-SAFE can inform the rescuers in an emergency even if you are no longer able to do so by yourself.

UCLEAR is also the first manufacturer in the world to present DynaMESH, the first dynamic MESH intercom network in MOTION headsets, where there are no longer any differences in the handling or configuration of Bluetooth and/or mesh-capable headsets. The DynaMESH intercom network pairs seamlessly with mesh and normal Bluetooth headsets and automatically reorganises itself as soon as a driver changes position within the group, leaves it or comes back into range. In combination with UCLEAR's proven MULTI-HOP technology, the headsets in the group achieve maximum range with a constantly stable connection, as each rider acts like a relay station and forwards the communication to the next rider.

With the BUTTONLESS GESTURE CONTROL, UCLEAR has integrated the world's first contactless gesture control into a Bluetooth motorbike headset. After activating the function, the MOTION Infinity and MOTION 6 models emit a sensor beam from the side. This recognises simple hand gestures such as waving at the height of the headset as well as the distance of the hand and controls common functions such as the volume, pause and start of the music as well as the music tracks of the wirelessly connected smartphone. As there are no buttons to press, operating the MOTION headset is no longer a problem, even when wearing thick gloves.

The UCLEAR headsets in the MOTION series understand some voice commands via U-COMMAND so that the headset can also be operated without buttons. For example, voice commands can be used to switch on the intercom, check the battery status, start the music or redial the last telephone number. You can also call contacts from the phone list directly by voice command or, with a little practice, even have the desired phone number recited and dialled. The voice commands can also be customised and trained to suit your own pronunciation and even the language itself. Many of the settings and functions are confirmed or announced as understood by the U-PROMPT voice output of the motion headsets. In addition, the MOTION headsets also support voice assistants such as Apple Siri or Google Voice, which means that all the possibilities of the connected smartphone can be fully utilised with an appropriate Internet connection.

U-MOVE is the name of the motion sensor built into the MOTION headsets and, like many other interesting functions, has been integrated into a motorbike headset for the first time by UCLEAR. The motion sensor ensures that the headset switches off automatically if it is not moved for a longer period of time. It also switches the headset on again as soon as the helmet is moved. This saves a lot of power and prevents a completely flat battery if you forget to switch the headset off normally after a ride.
Very convenient: If the headset was previously switched off using the motion sensor rather than the switch, it also switches itself on again using the motion sensor as soon as you put the helmet on for the next ride.

UCLEAR's E-Z (Easy) 1-Touch pairing allows the MOTION systems to pair very quickly with other participants and access frequently used functions such as controlling the headset via voice commands or controlling smartphone functions and apps using Apple Siri or Google Voice. It really is E-Z!

U-PAIR also allows fast pairing with any Bluetooth headsets from other manufacturers. This is not a matter of course, as the intercom profiles for the intercom system differ greatly between almost all manufacturers and are therefore not compatible with each other. To connect to the UCLEAR headset, the headset from the other manufacturer is set to search mode for a smartphone. Press and hold the power button on the UCLEAR headset for 10 seconds until the LED flashes purple and wait briefly for the two headsets to synchronise. This pairing process only needs to be carried out once. You can then start the intercom system as usual and talk to the other headset. The U-PAIR function can even be used to pair Bluetooth headsets, loudspeakers and hands-free systems that do not support the intercom function themselves.

CLEARLink is our free smartphone app that even allows you to wirelessly update the firmware of the UCLEAR AMP and MOTION series and adjust all settings for these communication systems at a touch of a button. The app also displays the headset's battery status and firmware version, as well as interactive tutorials/videos for all the headset's key features and complete user guides. The CLEARLink app is available free of charge for Apple and Android devices and should always be installed to enjoy the full functionality and convenience of UCLEAR headsets.